Add This

Monday 5 July 2021

दिल्ली में रहने वाले वाहन चालकों को नहीं देना होगा टोल , FASTag से अपने आप कट जाएगा पार्किंग का शुल्क

 राजधानी में फास्टटैग से ट्रायल शुरू


नई दिल्ली नगर पालिका परिषद (एनडीएमसी) ने इसके लिए मालचा मार्ग पार्किंग को चिन्हित किया है। जहां पर फास्टटैग से शुल्क लेने वाली तकनीक को अगले दो सप्ताह में स्थापित किया जाएगा। इसके बाद फिर ट्रायल शुरू होगा। ट्रायल सफल होने की स्थिति में इसे एनडीएमसी की करीब 40 पार्किंग में लागू किया जाएगा। फिलहाल जिस पार्किंग से ट्रायल शुरू होगा वह 70 वाहनों की पार्किंग है।


दो सप्ताह में कैमरे और बूम बैरियर लगाने का कार्य शुरू



फास्टटैग से शुल्क लेने के लिए पार्किंग के प्रवेश और निकास पर वाहन की नंबर प्लेट को स्कैन करने वाले कैमरे व बूम बैरियर भी लगाए जाने हैं। इसको लेकर एक निजी कंपनी से बात हुई है वह निश्शुल्क एनडीएमसी को उपलब्ध कराने के लिए तैयार हो गई है। दो सप्ताह में कैमरे और बूम बैरियर लगाने का कार्य शुरू हो जाएगा। जिसके बाद से ट्रायल शुरू होगा।

दिल्ली-एनसीआर समेत इन इलाकों में बारिश की संभावना, इन इलाकों में होगी बारिश

 दिल्ली समेत कई इलाकों में बारिश की संभावना

मौसम विभाग की माने तो भारतीय मौसम विभाग ने मॉनसून को लेकर खुशखबरी जारी की है सोमवार को दिल्ली, भिवाड़ी, झज्जर, दादरी-चरखी, भिवानी और उसके आसपास के इलाकों में बारिश होने की संभावना है। इस दौरान तेज हवाएं चलेंगी और मौसम भी ठंडा रहेगा। मौसम विभाग की माने तो सोमवार को दिल्ली-एनसीआर, हरियाणा, पंजाब और उत्तर प्रदेश के कुछ इलाकों में बारिश हो सकती है। 




मंगलवार को इन स्थानों पर हो सकती है बारिश

इसके अलावा छह जुलाई यानी मंगलवार के लिए उत्तर प्रदेश में कुछ स्थानों पर और पश्चिमी उत्तर प्रदेश में अलग-अलग स्थानों पर बारिश और गरज की चेतावनी जारी की गई है। पृथ्वी विज्ञान मंत्रालय के सचिव एम राजीवन ने रविवार को कहा कि दक्षिणपश्चिम मॉनसून एक बार फिर सक्रिय हो गया है और ऐसे में अनुमान लगाया जा रहा है कि आठ जुलाई के बाद कई इलाकों में तेज बारिश होगी। 



Tuesday 20 November 2018

How to apply for brazil tourist Visa


Brazil is a tourist destination so getting a Brazil visa should not be a matter of challenge. US citizens, Canadians, Australians, and Japanese citizens have been provided special treatment from the Brazilian government as most of the visitors are from these countries. People from these countries can apply for e-visa. If you belong to these countries, you don’t need to bother about standing in a long queue in some Brazilian consulate or worry about hectic government applications or the scary look of the consulate clerk. Just go through the process online for the visa from anywhere in the world.

There are some terms and condition that you need to keep in mind and follow while you apply for a Brazil tourist visa.

  1. Valid Passport with validity of at least 6 months.
  2. You need to provide proof of flight booking, hotel booking, and travel route document.
  3. You should have at least $100 as your per day expenses.
  4. You need to have an International Certificate of Vaccination for yellow fever.
  5. The duration you are allowed to stay on Brazilian soil is as per the duration of visa provided to you.
While applying for the visa online, the following steps should be taken into consideration:

  1. The online application needs to be filled without any error. You will get a protocol number, take a print of it.
  2. Get ready a digital copy of your passport size photograph (at most 3 months old), of your passport.
  3. The best part of online visa is that you have an option of selecting processing time. Faster the processing time you select more price you will have to pay. You have three options. First one is Standard Processing Time which cost only $69.50 just $25 more than the actual cost of visa and takes only 10 business days to be processed. Second is Rush Processing Time for which you have to pay $99.50 for your visa application to be processed in 6 business days. The third is Super Rush Processing Time which cost you $134.50 to get your application processed in 4 business days.
  4. Take a look at all the detail filled like your age, name spellings etc.
  5. You can use any mode of payment gateway like the credit card, debit card, PayPal etc.
  6. Managing an online visa application is not as difficult as generally, people think of. If you find yourself in any difficulty you can get help from www.brazilevisa.org.



Thursday 5 October 2017

हिमाचल : इन दो शहरों के बीच आज से शुरू होने जा रही है हवाई सेवा

हिमाचल : दो शहरों के बीच आज से नई हवाई सेवा शुरू होने जा रही है। सुबह 10 बजे केंद्रीय स्वास्थ्य मंत्री जगत प्रकाश नड्डा तथा केंद्रीय नागरिक उड्डयन मंत्री जयंत सिन्हा हवाई सेवा को हरी झंडी दिखाएंगे।
एयर इंडिया की नई हवाई सेवा भुंतर एयरपोर्ट से भुंतर-चंडीगढ़ के लिए शुरू होगी। सुबह केंद्रीय स्वास्थ्य मंत्री जगत प्रकाश नड्डा तथा केंद्रीय नागरिक उड्डयन मंत्री जयंत सिन्हा हवाई सेवा को हरी झंडी दिखाएंगे। इसके लिए एयरपोर्ट अथॉरिटी ने सभी तैयारियों को पूरा कर दिया है।

भुंतर-चंडीगढ़ के बीच शुरू हो रही एयर इंडिया की 72 सीटर नई हवाई सेवा से कुल्लू-मनाली के पर्यटन को पंख लेंगे। समारोह में मंडी संसदीय क्षेत्र के सांसद राम स्वरूप शर्मा, सदर विधायक महेश्वर सिंह, मनाली के विधायक गोविंद ठाकुर मौजूद रहेंगे।
सांसद रामस्वरूप शर्मा ने कहा कि भुंतर-चंडीगढ़ हवाई सेवा से प्रदेश के पर्यटन कारोबार को पंख लगेंगे। उधर, विधायक गोविंद सिंह ठाकुर ने सेवा शुरू करने के लिए प्रधानमंत्री नरेंद्र मोदी, केंद्रीय मंत्री जेपी नड्डा और केंद्रीय नागरिक उड्डयन मंत्री जयंत सिन्हा का आभार जताया।


TCS Technical Interview Questions and Answers

TCS Possible Technical Interview Questions| for new Campus Recruitment


 The Campus Interview


This interview usually takes 45 minutes to an hour and may have one or two interviewers. One interviewer may focus on your communication skills, self-management skills and background by asking behavioral questions. The other will focus on your technical capabilities.

The Phone Interview

If TCS not coming to your school this fall, and you have probably submitted your resume online. You look great on paper and they would like to have an employment discussion with candidate. They will set up a mutually-convenient date and time for your phone interview. Your interviewer will assess your communication skills, self-management skills and background by asking behavioral questions. He / she may also assess your technical ability. If the phone interview goes well, you will be asked to join us for an in-person interview.

TCS Technical interview Questions
1. What is your strongest programming language (Java, ASP, C, C++, VB, HTML, C#, etc.)? 
   Point to remember: Before interview You should decide your Favorite programming language and be prepared based on that question.

2.Differences between C and Java?
1.JAVA is Object-Oriented while C is procedural.
2.Java is an Interpreted language while C is a compiled language.
3.C is a low-level language while JAVA is a high-level language.
4.C uses the top-down approach while JAVA uses the bottom-up approach.
5.Pointer go backstage in JAVA while C requires explicit handling of pointers.
6.The Behind-the-scenes Memory Management with JAVA & The User-Based Memory Management in C.
7.JAVA supports Method Overloading while C does not support overloading at all.
8.Unlike C, JAVA does not support Preprocessors, & does not really them.
9.The standard Input & Output Functions--C uses the printf & scanf functions as its standard input & output while JAVA uses the System.out.print & System.in.read functions.
10.Exception Handling in JAVA And the errors & crashes in C.

3.In header files whether functions are declared or defined?
Functions are declared within header file. That is function prototypes exist in a header file,not function bodies. They are defined in library (lib).

4.What are the different storage classes in C ?
There are four types of storage classes in C. They are extern, register, auto and static

5.What does static variable mean?
Static is an access qualifier. If a variable is declared as static inside a function, the scope is limited to the function,but it will exists for the life time of the program. Values will be persisted between successive 
calls to a function

6.How do you print an address ?
Use %p in printf to print the address.

7.What are macros? what are its advantages and disadvantages? 
Macros are processor directive which will be replaced at compile time.
The disadvantage with macros is that they just replace the code they are not function calls. similarly the advantage is they can reduce time for replacing the same values.
8.Difference between pass by reference and pass by value? 
Pass by value just passes the value from caller to calling function so the called function cannot modify the values in caller function. But Pass by reference will pass the address to the caller function instead of value if called function requires to modify any value it can directly modify.

9.What is an object?
Object is a software bundle of variables and related methods. Objects have state and behavior

10.What is a class?
Class is a user-defined data type in C++. It can be created to solve a particular kind of problem. After creation the user need not know the specifics of the working of a class.

11.What is the difference between class and structure?
Structure: Initially (in C) a structure was used to bundle different type of data types together to perform a particular functionality. But C++ extended the structure to contain functions also. 
The major difference is that all declarations inside a structure are by default public.
Class: Class is a successor of Structure. By default all the members inside the class are private.

12. What is ponter?
Pointer is a variable in a program is something with a name, the value of which can vary. The way the compiler and linker handles this is that it assigns 
a specific block of memory within the computer to hold the value of that variable.

13.What is the difference between null and void pointer?
A Null pointer has the value 0. void pointer is a generic pointer introduced by ANSI. Generic pointer can hold the address of any data type. 

14.what is function overloading 
   Function overloading is a feature of C++ that allows us to create multiple functions with the same name, so long as they have different parameters.Consider the following function:
   int Add(int nX, int nY)
    {
      return nX + nY;
    }

15.What is function overloading and operator overloading?

Function overloading: C++ enables several functions of the same name to be defined, as long as these functions have different sets of parameters (at least as far as their types are concerned). This capability is called function overloading. When an overloaded function is called, the C++ compiler selects the proper function by examining the number, types and order of the arguments in the call. Function overloading is commonly used to create several functions of the same name that perform similar tasks but on different data types.
Operator overloading allows existing C++ operators to be redefined so that they work on objects of user-defined classes. Overloaded operators are syntactic sugar for equivalent function calls. They form a pleasant facade that doesn't add anything fundamental to the language (but they can improve understandability and reduce maintenance costs).

16.what is friend function?
A friend function for a class is used in object-oriented programming to allow access to public, private, or protected data in the class from the outside.
Normally, a function that is not a member of a class cannot access such information; neither can an external class. Occasionally, such access will be advantageous for the programmer. Under these circumstances, the function or external class can be declared as a friend of the class using the friend keyword.

17.What do you mean by inline function?
The idea behind inline functions is to insert the code of a called function at the point where the function is called. If done carefully, this can improve the application's performance in exchange for increased compile time and possibly (but not always) an increase in the size of the generated binary executables.

18. Tell me something about abstract classes?
An abstract class is a class which does not fully represent an object. Instead, it represents a broad range of different classes of objects. However, this representation extends only to the features that those classes of objects have in common. Thus, an abstract class provides only a partial description of its objects.
19.What is the difference between realloc() and free()?
The free subroutine frees a block of memory previously allocated by the malloc subroutine. Undefined results occur if the Pointer parameter is not a valid pointer. If the Pointer parameter is a null value, no action will occur. The realloc subroutine changes the size of the block of memory pointed to by the Pointer parameter to the number of bytes specified by the Size parameter and returns a new pointer to the block. The pointer specified by the Pointer parameter must have been created with the malloc, calloc, or realloc subroutines and not been deallocated with the free or realloc subroutines. Undefined results occur if the Pointer parameter is not a valid pointer.

20.What is the difference between an array and a list?
Array is collection of homogeneous elements. List is collection of heterogeneous elements.
For Array memory allocated is static and continuous. For List memory allocated is dynamic and Random.
Array: User need not have to keep in track of next memory allocation.
List: User has to keep in Track of next location where memory is allocated.
Array uses direct access of stored members, list uses sequential access for members.

21.What are the differences between structures and arrays?
Arrays is a group of similar data types but Structures can be group of different data types

22.What is data structure?
A data structure is a way of organizing data that considers not only the items stored, but also their relationship to each other. Advance knowledge about the relationship between data items allows designing of efficient algorithms for the manipulation of data.
23. Can you list out the areas in which data structures are applied extensively?
Compiler Design,
Operating System,
Database Management System,
Statistical analysis package,
Numerical Analysis,
Graphics,
Artificial Intelligence,
Simulation

24.What are the advantages of inheritance?

It permits code reusability. Reusability saves time in program development. It encourages the reuse of proven and debugged high-quality software, thus reducing problem after a system becomes functional.

25. what are the two integrity rules used in DBMS?
The two types of  integrity rules are referential integrity rules and entity integrity rules. Referential integrity rules dictate that a database does not contain orphan foreign key values. This means that 
A primary key value cannot be modified if the value is used as a foreign key in a child table. Entity integrity dictates that the primary key value cannot be Null.

26. Tell something about deadlock and how can we prevent dead lock?
In an operating system, a deadlock is a situation which occurs when a process enters a waiting state because a resource requested by it is being held by another waiting process, which in turn is waiting for another resource. If a process is unable to change its state indefinitely because the resources requested by it are being used by other waiting process, then the system is said to be in a deadlock.
Mutual Exclusion: At least one resource must be non-shareable.[1] Only one process can use the resource at any given instant of time.
Hold and Wait or Resource Holding: A process is currently holding at least one resource and requesting additional resources which are being held by other processes.
No Preemption: The operating system must not de-allocate resources once they have been allocated; they must be released by the holding process voluntarily.
Circular Wait: A process must be waiting for a resource which is being held by another process, which in turn is waiting for the first process to release the resource. In general, there is a set of waiting processes, P = {P1, P2, ..., PN}, such that P1 is waiting for a resource held by P2, P2 is waiting for a resource held by P3 and so on till PN is waiting for a resource held by P1.[1][7]

Thus prevention of deadlock is possible by ensuring that at least one of the four conditions cannot hold.
27. What is Insertion sort, selection sort, bubble sort( basic differences among the functionality of the three sorts and not the exact algorithms)

28. What is Doubly link list?
 A doubly linked list is a linked data structure that consists of a set of sequentially linked records called nodes. Each node contains two fields, called links, that are references to the previous and to the next node in the sequence of nodes. The beginning and ending nodes' previous and next links, respectively, point to some kind of terminator, typically a sentinel node or null, to facilitate traversal of the list. If there is only one sentinel node, then the list is circularly linked via the sentinel node. It can be conceptualized as two singly linked lists formed from the same data items, but in opposite sequential orders.
29.What is data abstraction?  what are the three levels of data abstraction with Example?
Abstraction is the process of recognizing and focusing on important characteristics of a situation or object and leaving/filtering out the un-wanted characteristics of that situation or object.
Lets take a person as example and see how that person is abstracted in various situations

A doctor sees (abstracts) the person as patient. The doctor is interested in name, height, weight, age, blood group, previous or existing diseases etc of a person
An employer sees (abstracts) a person as Employee. The employer is interested in name, age, health, degree of study, work experience etc of a person. 

Abstraction is the basis for software development. Its through abstraction we define the essential aspects of a system. The process of identifying the abstractions for a given system is called as Modeling (or object modeling).
Three levels of data abstraction are:
1. Physical level : how the data is stored physically and where it is stored in database.
2. Logical level : what information or data is stored in the database. eg: Database administrator
3.View level : end users work on view level. if any amendment is made it can be saved by other name.

30.What is command line argument?
Getting the arguments from command prompt in c is known as command line arguments. In c main function has three arguments.They are:
Argument counter
Argument vector
Environment vector

31.Advantages of a macro over a function?
Macro gets to see the Compilation environment, so it can expand #defines. It is expanded by the preprocessor. 

32.What are the different storage classes in C? 
Auto,register,static,extern

33.Which header file should you include if you are to develop a function which can accept variable number of arguments?
stdarg.h

34.What is cache memory ?
Cache Memory is used by the central processing unit of a computer to reduce the average time to access memory. The cache is a smaller, faster memory 
which stores copies of the data from the most frequently used main memory locations. As long as most memory accesses are cached memory locations, the average
latency of memory accesses will be closer to the cache latency than to the latency of main memory.

35.What is debugger?
A debugger or debugging tool is a computer program that is used to test and debug other programs
36. Const char *p , char const *p What is the difference between the above two?   
1) const char *p - Pointer to a Constant char ('p' isn't modifiable but the pointer is)
2) char const *p - Also pointer to a constant Char 
However if you had something like:
char * const p - This declares 'p' to be a constant pointer to an char. (Char p is modifiable but the pointer isn't)

37. What is Memory Alignment?  
Data structure alignment is the way data is arranged and accessed in computer memory. It consists of two separate but related issues: data alignment and data structure padding. 

38.Explain the difference between 'operator new' and the 'new' operator?   
The difference between the two is that operator new just allocates raw memory, nothing else. The new operator starts by using operator new to allocate memory, but then it invokes the constructor for the right type of object, so the result is a real live object created in that memory. If that object contains any other objects (either embedded or as base classes) those constructors as invoked as well.

39. Difference between delete and delete[]?    
The keyword delete is used to destroy the single variable memory created dynamically which is pointed by single pointer variable.
Eg: int *r=new(int)
the memory pointed by r can be deleted by delete r.
delete [] is used to destroy array of memory pointed by single pointer variable.
Eg:int *r=new(int a[10])
The memory pointed by r can be deleted by delete []r.

40. What is conversion constructor?    
A conversion constructor is a single-parameter constructor that is declared without the function specifier 'explicit'. The compiler uses conversion constructors to convert objects from the type of the first parameter to the type of the conversion constructor's class.To define implicit conversions, C++ uses conversion constructors, constructors that accept a single parameter and initialize an object to be a copy of that parameter.

41.What is a spanning Tree?
A spanning tree is a tree associated with a network. All the nodes of the graph appear on the tree once. A minimum spanning tree is a spanning tree organized so that the total edge weight between nodes is minimized.  

42. Why should we use data ware housing and how can you extract data for analysis with example?
If you want to get information on all the techniques of designing, maintaining, building and retrieving data, Data warehousing is the ideal method. A data warehouse is premeditated and generated for supporting the decision making process within an organization.
Here are some of the benefits of a data warehouse:

o With data warehousing, you can provide a common data model for different interest areas regardless of data's source. In this way, it becomes easier to report and analyze information.

o Many inconsistencies are identified and resolved before loading of information in data warehousing. This makes the reporting and analyzing process simpler.

o The best part of data warehousing is that the information is under the control of users, so that in case the system gets purged over time, information can be easily and safely stored for longer time period.

o Because of being different from operational systems, a data warehouse helps in retrieving data without slowing down the operational system.

o Data warehousing enhances the value of operational business applications and customer relationship management systems.

o Data warehousing also leads to proper functioning of support system applications like trend reports, exception reports and the actual performance analyzing reports.
Data mining is a powerful new technology to extract data for analysis.

43.Explain recursive function & what is the data structures used to perform recursion?
a) A recursive function is a function which calls itself.
b) The speed of a recursive program is slower because of stack overheads. (This attribute is evident if you run above C program.)
c) A recursive function must have recursive conditions, terminating conditions, and recursive expressions.

Stack data structure . Because of its LIFO (Last In First Out) property it remembers its caller so knows whom to return when the function has to return. Recursion makes use of system stack for storing the return addresses of the function calls. Every recursive function has its equivalent iterative (non-recursive) function. Even when such equivalent iterative procedures are written, explicit stack is to be used.

44.Differentiate between Compiler and Interpreter?

An interpreter reads one instruction at a time and carries out the actions implied by that instruction. It does not perform any translation. But a compiler translates the entire instructions

45.What is scope of a variable?
Scope refers to the visibility of variables. It is very useful to be able to limit a variable's scope to a single function. In other words, the variable wil have a limited scope

46.What is an interrupt?
   Interrupt is an asynchronous signal informing a program that an event has occurred. When a program receives an interrupt signal, it takes a specified action. 

47.What is user defined exception in Java?
The keywords used in java application are try, catch and finally are used in implementing used-defined exceptions. This Exception class inherits all the method from Throwable class.

48.What is java Applet?
Applet is java program that can be embedded into HTML pages. Java applets runs on the java enables web browsers such as mozila and internet explorer. Applet is designed to run remotely on the client browser, so there are some restrictions on it. Applet can't access system resources on the local computer. Applets are used to make the web site more dynamic and entertaining. 

49.What do you know about the garbage collector?

Garbage collection is the systematic recovery of pooled computer storage that is being used by a program when that program no longer needs the storage. This frees the storage for use by other programs 
(or processes within a program). It also ensures that a program using increasing amounts of pooled storage does not reach its quota (in which case it may no longer be able to function). 

Garbage collection is an automatic memory management feature in many modern programming languages, such as Java and languages in the .NET framework. Languages that use garbage collection are often interpreted or run within a virtual machine like the JVM. In each case, the environment that runs the code is also responsible for garbage collection.

50.Write a Binary Search program
int binarySearch(int arr[],int size, int item)
{
int left, right, middle;
left = 0;
right = size-1;

while(left <= right)
{
middle = ((left + right)/2);

if(item == arr[middle])
{
return(middle);
}

if(item > arr[middle])
{
left = middle+1;
}
else
{
right = middle-1;
}
}

return(-1);
}

51.What are enumerations?
An enumeration is a data type, used to declare variable that store list of names. It is act like a database, which will store list of items in the variable. example: enum shapes{triangle, rectangle,...

52.What is static identifier?
The static identifier is used for initializing only once, and the value retains during the life time of the program / application. A separate memory is allocated for ‘static’ variables. This value can be used between function calls. The default value of an uninitialized static variable is zero. A function can also be defined as a static function, which has the same scope of the static variable. 

53.What is Cryptography?
Cryptography is the science of enabling secure communications between a sender and one or more recipients. This is achieved by the sender scrambling a message (with a computer program and a secret key) and leaving the recipient to unscramble the message (with the same computer program and a key, which may or may not be the same as the sender's key).
There are two types of cryptography: Secret/Symmetric Key Cryptography and Public Key Cryptography

54.What is encryption?

Encryption is the transformation of information from readable form into some unreadable form.
55.What is decryption?
Decryption is the reverse of encryption; it's the transformation of encrypted data back into some intelligible form.
56.What exactly is a digital signature?
Just as a handwritten signature is affixed to a printed letter for verification that the letter originated from its purported sender, digital signature performs the same task for an electronic message. A digital signature is an encrypted version of a message digest, attached together with a message.

Saturday 19 August 2017

ट्रेनों की तरह HRTC की बसों में भी मिलेगा पैक्ड फ़ूड

























हिमाचल सरकार अब ट्रेनों में मिलने वाली सुविधा HRTC की बसों में मुहईया करने की तयारी कर रही है। अब आप एचआरटीसी की बसों में पैक्ड फूड का मज़्ज़ा ले सकेंगे। जानकारी के अनुसार सोशल मीडिया पर खाने की क्वालिटी को लेकर लोगों की शिकायत पर यह फैसला लिया गया है। बता दें की सबसे जायदा परेशानी हिमाचल से बहार जाने वाले यात्रियों को होती है खासकर चंडीगढ़ और दिल्ली रूट पर। बहुत टाइम यात्रि खाने के महंगे रेट और घटिया क्वालिटी से परेशान हैं। पैक्ड फ़ूड मिलने से काफी हद तक इस समस्या का हल हो जाएगा। इस से लोगों और HRTC दोनों का फ़ायदा है। 

यह सब मिलेगा पैक्ड फ़ूड में

पैक्ड फ़ूड में आपको दो सैंडविच, पनीर कटलेट और पानी की बोतल मिलेगी। जिसकी कीमत सिर्फ 60 रुपये होगी। पहले चरण में लंबे रूटों पर चलने वाली लगभग 250 बसों में यह सेवा आरंभ की जाएगी।
परिवहन मंत्री जीएस बाली ने यह एलान नाहन में एक कार्यक्रम दौरान किया । कार्यक्रम के बाद पत्रकारों को संबोधित करते हुए जीएस बाली कहा कि टैक्सी चालक और निजी बस ऑपरेटरों के चालकों को दुर्घटना में सुविधा नहीं मिल रही है जिसके लिए सरकार नई योजना शुरू करेगी। ताकि निजी चालकों को भी वन टाइम कंपनसेशन मिल सके। इससे हिमाचल प्रदेश के लगभग चार लाख वाहन चालकों को फायदा होगा।

Thursday 20 July 2017

shiv tandav stotram

Shiv Tandav Stotra in Sanskrit-Hindi Lyrics with easy readble format

||सार्थशिवताण्डवस्तोत्रम् ||

||श्रीगणेशाय नमः ||

जटा टवी गलज्जल प्रवाह पावितस्थले, गलेऽवलम्ब्य लम्बितां भुजङ्ग तुङ्ग मालिकाम् |
डमड्डमड्डमड्डमन्निनाद वड्डमर्वयं, चकार चण्डताण्डवं तनोतु नः शिवः शिवम् ||१||

जटा कटा हसंभ्रम भ्रमन्निलिम्प निर्झरी, विलो लवी चिवल्लरी विराजमान मूर्धनि |
धगद् धगद् धगज्ज्वलल् ललाट पट्ट पावके किशोर चन्द्र शेखरे रतिः प्रतिक्षणं मम ||२||

धरा धरेन्द्र नंदिनी विलास बन्धु बन्धुरस् फुरद् दिगन्त सन्तति प्रमोद मानमानसे |
कृपा कटाक्ष धोरणी निरुद्ध दुर्धरापदि क्वचिद् दिगम्बरे मनो विनोदमेतु वस्तुनि ||३||

लता भुजङ्ग पिङ्गलस् फुरत्फणा मणिप्रभा कदम्ब कुङ्कुमद्रवप् रलिप्तदिग्व धूमुखे |
मदान्ध सिन्धुरस् फुरत् त्वगुत्तरीयमे दुरे मनो विनोद मद्भुतं बिभर्तु भूतभर्तरि ||४||

सहस्र लोचनप्रभृत्य शेष लेखशेखर प्रसून धूलिधोरणी विधूस राङ्घ्रि पीठभूः |
भुजङ्ग राजमालया निबद्ध जाटजूटक श्रियै चिराय जायतां चकोर बन्धुशेखरः ||५||

ललाट चत्वरज्वलद् धनञ्जयस्फुलिङ्गभा निपीत पञ्चसायकं नमन्निलिम्प नायकम् |
सुधा मयूखले खया विराजमानशेखरं महाकपालिसम्पदे शिरोज टालमस्तु नः ||६||

कराल भाल पट्टिका धगद् धगद् धगज्ज्वल द्धनञ्जयाहुती कृतप्रचण्ड पञ्चसायके |
धरा धरेन्द्र नन्दिनी कुचाग्र चित्रपत्रक प्रकल्प नैक शिल्पिनि त्रिलोचने रतिर्मम |||७||

नवीन मेघ मण्डली निरुद् धदुर् धरस्फुरत्- कुहू निशीथि नीतमः प्रबन्ध बद्ध कन्धरः |
निलिम्प निर्झरी धरस् तनोतु कृत्ति सिन्धुरः कला निधान बन्धुरः श्रियं जगद् धुरंधरः ||८||

प्रफुल्ल नीलपङ्कज प्रपञ्च कालिम प्रभा- वलम्बि कण्ठकन्दली रुचिप्रबद्ध कन्धरम् |
स्मरच्छिदं पुरच्छिदं भवच्छिदं मखच्छिदं गजच्छि दांध कच्छिदं तमंत कच्छिदं भजे ||९||

अखर्व सर्व मङ्गला कला कदंब मञ्जरी रस प्रवाह माधुरी विजृंभणा मधुव्रतम् |
स्मरान्तकं पुरान्तकं भवान्तकं मखान्तकं गजान्त कान्ध कान्त कं तमन्त कान्त कं भजे ||१०||

जयत् वदभ्र विभ्रम भ्रमद् भुजङ्ग मश्वस – द्विनिर्ग मत् क्रमस्फुरत् कराल भाल हव्यवाट् |
धिमिद्धिमिद्धिमिध्वनन्मृदङ्गतुङ्गमङ्गल ध्वनिक्रमप्रवर्तित प्रचण्डताण्डवः शिवः ||११||

स्पृषद्विचित्रतल्पयोर्भुजङ्गमौक्तिकस्रजोर्- – गरिष्ठरत्नलोष्ठयोः सुहृद्विपक्षपक्षयोः |
तृष्णारविन्दचक्षुषोः प्रजामहीमहेन्द्रयोः समप्रवृत्तिकः ( समं प्रवर्तयन्मनः) कदा सदाशिवं भजे ||१२||

कदा निलिम्पनिर्झरीनिकुञ्जकोटरे वसन् विमुक्तदुर्मतिः सदा शिरः स्थमञ्जलिं वहन् |
विमुक्तलोललोचनो ललामभाललग्नकः शिवेति मंत्रमुच्चरन् कदा सुखी भवाम्यहम् ||१३||

इदम् हि नित्यमेवमुक्तमुत्तमोत्तमं स्तवं पठन्स्मरन्ब्रुवन्नरो विशुद्धिमेतिसंततम् |
हरे गुरौ सुभक्तिमाशु याति नान्यथा गतिं विमोहनं हि देहिनां सुशङ्करस्य चिंतनम् ||१४||

पूजा वसान समये दशवक्त्र गीतं यः शंभु पूजन परं पठति प्रदोषे |
तस्य स्थिरां रथगजेन्द्र तुरङ्ग युक्तां लक्ष्मीं सदैव सुमुखिं प्रददाति शंभुः ||१५||

इति श्रीरावण- कृतम् शिव- ताण्डव- स्तोत्रम् सम्पूर्णम्